Automatic High Speed Precision Metal Sheet Steel coil Slitting Line With Siemens PLC

Longitudinal shearing machine, also known as vertical shearing line, vertical shearing machine, slitting machine, is used to roll the metal coil sheet through uncoiling, vertical shearing and winding into the required width of the strip. It is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and all kinds of metal materials after surface coating.

关键词:

slitting line machine aluminum foil slitting machine slitting coil machine

key word:

Laser cutting machine | Bending machine

  • Product Description
  • Components
  • Technical Parameters
    • Commodity name: Automatic High Speed Precision Metal Sheet Steel coil Slitting Line With Siemens PLC
    • Commodity ID: 1056959516504842240

    Longitudinal shearing machine, also known as vertical shearing line, vertical shearing machine, slitting machine, is used to roll the metal coil sheet through uncoiling, vertical shearing and winding into the required width of the strip. It is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and all kinds of metal materials after surface coating.

    Automatic High Speed Precision Metal Sheet Steel coil Slitting Line With Siemens PLC

     

    Decoiling, Slitting & Recoiling Line

    0.3-3×1800mm

     

    . Technical parameters:

    1. Raw material parameters

    1. 1  The coil meterial: σs235Mpa CR, Galvanized plate

    1. 2  The thickness of the coil: 0.3-3mm;

    1. 3  The width of the coil: 800-1800mm;

      •  1. 4  The ID of the coil: φ508mm  φ610mm
      •  1. 5  The OD of the coil:φ1600mm
      •  1. 6  The weight of the coil: 15T;

    2.  Equipment parameters

     2. 1  Slitting minimum strip :width:50mm

    2. 2  Slitting precision: Width tolerance ±0.1mm

    2. 3  Slitting pieces: 0.3-1mm10pcs

    1.1-2mm7pcs

    2.1-3mm5pcs

    2. 4  Material of tool shaft: φ220mmMaterial 42CrMo;

    2. 5  Blade specifications: φ220×φ340×15mm( prepare by users)

    2. 6  Blade material: 70Sicrv,  Hardness HRC 56-60;

    2. 7  Recoiling speed: 0-120m/min   

    2. 8  Recoiling ID: φ508mm

    2. 9  The standard height of the production line:1000mm;

    3. Main electric parameters:

    3. 1  Using power: 380V±10%  three-phased electricity, 50Hz

    3. 2  Control voltage: 220V±10%

    3. 3  Electric control cabinet: IP40

    3. 4  Production line operation cabinet: IP45

    3. 5  Gross installed capacit:208.5Kw

    4. Using environment:

    4. 1  Temperature: -5-45°

    4. 2  Humidity: 20-85%PH(without dew)

    4. 3  Sea level: Under 1000m

    4. 4  Strength of earthquake: 6 magnitude

    5. Craftsman parameters of the line:

    5. 1  Feeding direction: to be confirmed normally left to right

    5. 2  Number of operators: 3-5 people

    5. 3  The color of the line: It could be decided by the buyer.

    II. Process flow:

                        

    Carry coil→ load coil →decoil press-guide shovel-head pinchinghead cutting

                           

    looping,transition guide slitting transition looping & storage 

    scrap rewinding

    pre-separation, damping,  press- separation recoiling packing discharging (electric control system, hydraulic system)

    . Equipment composition:

    1.  V  shape coil-loading

     Type: Saddle-type

          Material: Steel-plate welded strcture parts

          Founcation: It is for storing the steel coil and transport loaded coil to prevent it from crashing.

    2.  Hydraulic coil-loading car: Weight capacity:15T

       It consists of bottom base, up-support base, car shaft, car wheel, bearing, guiding pillar, guidding sleeve, lifting cylinder, running motor,etc This car can carry coil make it lift up and down to the center of decoiler. the lifting of the car is finished by oil cylinder, the running of the car is driven by motor.

     Type: Four wheels Guide-track styled walking,

     Main material: steel-welding parts

    Power of transmission: 3kw cycloidal motor

    Power of Lift: Oil cylinderφ160x700mm

    Specification: loading weight 15000kg,

    Coil O.D.: φ1600mm

    3.  Hydraulic cantilever & expansion decoiler: loading weight: 15T

       It consists of bracket, decoiling shaft, expansion-keeping disc, decoiler arc plate, hydraulic expansion angled-lift splits harmomegathus mechanism, equipped with damping & braking mechanism, bearing base, hydraulic support arm, etc.

    Typehydraulic cantilever expansion type

    Scope of expansion: φ470-520mm, add pads to φ610mm

    Main material: welded steel plate part of frame, main axis with heat treatment

    Expansion Oil cylinder: φ160×1000mm Rotating cylinder 

    Expansion of rose oil cylinder: φ160mm x 95mm 2pcs

    Suitable wide: 800-1800mm    

    Specifications: Weight capacity 15000Kg

    O.D. of the suitable coil: ≤ φ1600mm

    4.  Hydraulic press-guide, shovel-head mechanism:

        Hydraulic press-guide mechanism: It consists of hydraulic press-guide arm, press-guide rubber wheel, bearing base, chain & sprocket wheel transmission mechanism, equipped with 2.2kw cycloidal speed motor etc.

      Type: hydraulic Cantilever styled, hydraulic motor press-guide

      Main material: Steel structure pieces of press-guide arm, press-guide roller with polyurethane

      Oil cylinder: φ8400mm

      Press-guide roll: φ310×400mm

      Press-guide motor: 2.2kw cycloidal speed motor

         Hydraulic shovel-head mechanism: It consists of shovel-head shell, hydraulic flexible shovel-head plate, shovel-head hydraulic lifting & balance mechanism etc.

    Type: Hydraulic lifting & flexible style

      Main material: Steel structures pieces bracket,45# shovel plate

    Oil cylinder spefication: Liftingφ50×400mm  flexibleφ63×500mm

    5.  Hydraulic pinching

    hydraulic pinching machine:

    It consists of base, bracket, beam, pinching sliding block axle seat, 2 pinching rolls, upper pinching roll hydrauilc press-down & lifting mechanism, etc.

         Type: 2 pinching rolls

         Main material: steel structure pieces base, bracket

         Pinching rollers: 42CrMo, Mid frequency hardening hardness HRC54-58 The surface is plated by hard chrome HRC 56-60

    Pinching oil cylinder: φ100×180mm  2pcs

         Type of lift: press down & pinch by oil cylinder

         Oil cylinder spefication:φ63×120mm  

     Pinching power mechanism:

    It consists of base, reducer, 22kw AC motor, coupling, clutch, universal drive shaft, clutch, etc.

           Type: pinching distributor box transmission

           Main material: steel structure pieces base, welded steel plate gear box

           Gear: 40Cr forging, surface with high-frequency quenching

           Universal joint: SWC1180

           Power:  22kw AC motor (frequency converting control)

    6.  Hydraulic head-shearer: .3×1800 mm ( Hydraulic head & tail shearing)

    7.  looping & transition:

    It consists of bracket, Arc transition rollaway nest, bearing base, moving lift platform, veer roller, hydraulic lifting up & down mechanism, etc.

             Looping pit: 2.5m×1.0m×2.5m (L×W×D) cement watering

    8. Guide & centralization mechanism:

    It consists of guide-track base, guide pillar, screw mandrel adjustable & centralizing mechanism, active guide base, multi-rolled backup wheel,  etc.

    Type: Vertical roller guiding,  screw rod centralizing

         Main material: square pipe of  bracket,   45# guide pillar grinded

         Vertical rod specifications: φ90×100mm 2 pcs high-frequency quenching

             Carrier Roller specification: φ62×1800mm hard chrome surface.

    Rectifying form: double lead screw with one side manual

             Adjustable range: 800-1800mm

    9. Slitter:

    It consists of 2sets of main-unit part & power part..

       Power part:

        It consists of power base, reducer, 55 kw DC speed-regulation motor, counter-tooth distribution gear box, coupling, clutch, universal cross gimbal shaft etc.

    Type: Reducer equiped with gear counter-tooth distribution box

       Main material: Steel structure pieces base, distribution box

       Gear: 40Cr heat-treatment, High-frequency quenching

       Power: 55Kw DC speed-regulation motor equipped with SSD 590 Controller

       Main-unit part:

         It consists of base, fixed-styled bracket, sliding block of tool shaft, tool shaft two pieces, active bracket, moveable bracket hydraulic entry-exit & knife changing and adjusting mechanism, upper tool shaft simultaneous lifting & press-down adjustable mechanism, etc. ( blades, spacers, rubber ring prepared by user)

    Type: disc type slitting 

     Main material: Welded pieces base, forged bearing sliding block

       Tool shaft:  42CrMo

              Moveable oil cylinder: φ80×600mm

              Material of blade: 70Sicrv.   Hardness: HRC 56-60

          Specification of blade: φ220×φ340×15mm

    10. Rollerway worktable:

    It consists of bracket, bearing base, rollerway, supporting plate, etc.

    Type: rollerway style, with swing table

              Main material: steel pipe of frame, rollerway by seamless pipe

             Spefication:2500mm×180mm x 1000mm

    11. Scrap-rewinder mechanism:

    It consists of bracket, rewinding shaft,  double rewinding disc, guide wheel, rows  agency, 3kw cycloid pin wheel motor, etc.

    Type:  friction tension control roll up type  automatic wiring

           Main material: Welded pieces base, frame,

             Power : 3kw cycloid pin wheel motor

    12. Looping & hydraulic material-storage bridge:

    It consists of bracket, bearing, active lifting platform, steering roll, hydraulic lifting up & down mechanism etc.

           Main material: structure steel platform

           Specification of looping pit: Length3.0m×Width2.2m×Depth4.5m

    irrigated by cement

    13. Pre-seperation, hydraulic damping & tension mechanism, hydraulic press-seperation

    Mechanism, hydraulic support plate mechanism:

     It consists of base, bearing base, pre-seperation shaft, material-pressing roller mechanism, hydraulic damping bracket, damping plate, damping plate hydraulic lifting & press-down mechanism, tension frame, press-seperation bracket, press-seperation shaft, press-seperation hydraulic lifting up & press-down mechanism, equipped with material-seperation sheet, spacer etc.

    Type: Hydraulic clamping-board damping style,

    Main material: wool felt damping plate, polyurethane tension steering

    Preassigned sheets: φ220 xφ80 x4mm  material: 65Mn

    Tension roller: φ350 x 1900mm

               Damping cylinder: φ80×120mm  

     Press-seperation cylinder: φ80×300mm  2pcs

     Hyraulic pressure plate: suitable wide: 1800mm

     The pallet balances the oil cylinder: φ50 x 300mm

    14. Recoiling Line: Weight capacity:

       It consists of base, speed-reduction gear transmission box, recoiling shaft,

    arc-shaped plate, hydraulic recoiling expand mechanism, swallowtail slot slant slider harmomegathus mechanism, hydraulic mouth of tongs clamping mechanism, arrester mechanism, coupling, hydraulic active supporting arm, supporting base, equipped with 132Kw DC speed-regulation motor etc.

    Type: hydraulic oblique T expansion, hydraulic jaw clamping

    Main material: steel welded structural parts stand, distribution box

          Specification of recoiling drum: φ508 x1900 mm 

          Maximum expansion distance: 50mm

          Collapsible cylinder; φ160mm x 96mm

          Recoiling shaft material: 42CrMoV,  Heat treatment

    Support cylinder: φ125 x 580mm

         Winding entrainment: hydraulic linkage inclined clamp type

    Recoiling power: 132Kw DC speed-regulation motor. equipped with SSD 590 Controll er

    15. Hydraulic discharging car:

    It consists of frame, V-shaped supporting base, hydraulic lifting up & down mechanism, car shaft & wheel, guiding pillar, guiding sleeve, running motor,etc.This car carry seperated strips, hydraulic lifting, it is driven by four-wheeled guide rail.

    Type: Guide-rail walking wheel car, hydraulic lifting, driven by motor

           Main material: steel-plate welded structure of body

           Walking wheel:42CrMo surface hardening

           Guiding pillar: 45# steel heat treatment

           Specification of oil cylinder: Liftingφ16700mm

           Running motor: 3kw cycloidal motor

       Applicable to steel coil: O.D. ≤φ1600mm

    Specification: 15000kg

    16. Electric control system:                                             

    It consisits of main operation cabinet, vice operation table, DC electric cabinet, etc, slitting & recoiline DC motocr equiped with digital DC speed-adjusting divice( SSD 590C) , Janpanese MITSUBISHI  PLC, which carrying out whole line linkage, touched screen with Man-machine conversation, etc.

     The equipment set safty protection, emergency-stop and machine-stop lamp, etc.

    Using power: 380V,  50Hz

    Control voltage: 220V,  50Hz

    17. Hydraulic pneumatic system: (Users prepare air)                           

    Hydraulic station consists of hydraulic pump, valve plate, hydraulic inverting valve, spillover valve, defending pressure valve and adjusting valve,high pressure soft and hard pipes, joints, etc.

    Transmission power: 7.5kw-4

    Rated pressure: 16Mpa, and the actual press 10-12 Mpa

    Flow rate:40L/min

    Air force 0.5-0.9Mpa 0.9 cube (without water)

    : Acquired factory Requirements

    1Electrical pressure: 380V±10%,  frequency: 50Hz±10%

    2Using environment: be suitable for -5-50℃,humidity20%-80% (without dew)

    3. Equipment foundation: Protection guardrail, hydraulic oil

    4. Air force 0.5-0.9Mpa 0.9 cube (without water)

     

    Key words:
    • slitting line machine
    • aluminum foil slitting machine
    • slitting coil machine
  •  Main Components 

    Serial No.

    Name

    Place of origine

    1

    Mitsubishi PLC

    Japan MITSUBISHI

    2

    Man-machine interface

    (touch screen)

    Taiwan

     

    3

    Encoder

    USA  Repp

    4

    DC controler

    SSD590C

    5

    Electric elements & buttom

    Zhengtai Group & Schneider

    6

    DC speed motor

    Wuxi Xianfeng DC Motor Co.,Ltd

    7

    Reducer

    Jiangsu Dongtai Shengyuan Construction machinery Co., LTD

    8

    Cycloidal reducer

    Jiangsu Kainite reducer Co., Ltd

    9

    Bearing

    Ha Wa Luo bearing

    10

    Universal joint

    Jinjiang Juli Auto Accessory Factory

    11

    Hydraulic cylinder, hydraulic system

    Wuxi Yingping Machinery Co;Ltd

    12

    Hydraulic pump

    Yuci Hydraulic Sets Factory

    13

    Hydraulic valve

    Shanghai Duolu Hydraulic &Peumatic Sets Company

    14

    Hydraulic joints& Adhesive pipes

    Wuxi Shunchang Hydraulic &Peumatic Elements Factory

    15

    Hydraulic pipes

    Wuxi Nanfang Pipes factory

    16

    Hydraulic system attached elements

    Wuxi Hydraulic Factory

    17

    Sealed parts

    Japanese VALQUA

  •  Technical parameters:

    1. Raw material parameters

    1. 1  The coil meterial: σs235Mpa CR, Galvanized plate

    1. 2  The thickness of the coil: 0.3-3mm;

    1. 3  The width of the coil: 800-1800mm;

    •  1. 4  The ID of the coil: φ508mm  φ610mm
    •  1. 5  The OD of the coil:φ1600mm
    •  1. 6  The weight of the coil: 15T;

Product Description

Automatic High Speed Precision Metal Sheet Steel coil Slitting Line With Siemens PLC

 

Decoiling, Slitting & Recoiling Line

0.3-3×1800mm

 

. Technical parameters:

  1. Raw material parameters

1. 1  The coil meterial: σs235Mpa CR, Galvanized plate

1. 2  The thickness of the coil: 0.3-3mm;

1. 3  The width of the coil: 800-1800mm;

    •  1. 4  The ID of the coil: φ508mm  φ610mm
    •  1. 5  The OD of the coil:φ1600mm
    •  1. 6  The weight of the coil: 15T;

2.  Equipment parameters

 2. 1  Slitting minimum strip :width:50mm

2. 2  Slitting precision: Width tolerance ±0.1mm

2. 3  Slitting pieces: 0.3-1mm10pcs

1.1-2mm7pcs

2.1-3mm5pcs

2. 4  Material of tool shaft: φ220mmMaterial 42CrMo;

2. 5  Blade specifications: φ220×φ340×15mm( prepare by users)

2. 6  Blade material: 70Sicrv,  Hardness HRC 56-60;

2. 7  Recoiling speed: 0-120m/min   

2. 8  Recoiling ID: φ508mm

2. 9  The standard height of the production line:1000mm;

3. Main electric parameters:

3. 1  Using power: 380V±10%  three-phased electricity, 50Hz

3. 2  Control voltage: 220V±10%

3. 3  Electric control cabinet: IP40

3. 4  Production line operation cabinet: IP45

3. 5  Gross installed capacit:208.5Kw

4. Using environment:

4. 1  Temperature: -5-45°

4. 2  Humidity: 20-85%PH(without dew)

4. 3  Sea level: Under 1000m

4. 4  Strength of earthquake: 6 magnitude

5. Craftsman parameters of the line:

5. 1  Feeding direction: to be confirmed normally left to right

5. 2  Number of operators: 3-5 people

5. 3  The color of the line: It could be decided by the buyer.

II. Process flow:

                    

Carry coil→ load coil →decoil press-guide shovel-head pinchinghead cutting

                       

looping,transition guide slitting transition looping & storage 

scrap rewinding

pre-separation, damping,  press- separation recoiling packing discharging (electric control system, hydraulic system)

. Equipment composition:

1.  V  shape coil-loading

 Type: Saddle-type

      Material: Steel-plate welded strcture parts

      Founcation: It is for storing the steel coil and transport loaded coil to prevent it from crashing.

2.  Hydraulic coil-loading car: Weight capacity:15T

   It consists of bottom base, up-support base, car shaft, car wheel, bearing, guiding pillar, guidding sleeve, lifting cylinder, running motor,etc This car can carry coil make it lift up and down to the center of decoiler. the lifting of the car is finished by oil cylinder, the running of the car is driven by motor.

 Type: Four wheels Guide-track styled walking,

 Main material: steel-welding parts

Power of transmission: 3kw cycloidal motor

Power of Lift: Oil cylinderφ160x700mm

Specification: loading weight 15000kg,

Coil O.D.: φ1600mm

3.  Hydraulic cantilever & expansion decoiler: loading weight: 15T

   It consists of bracket, decoiling shaft, expansion-keeping disc, decoiler arc plate, hydraulic expansion angled-lift splits harmomegathus mechanism, equipped with damping & braking mechanism, bearing base, hydraulic support arm, etc.

Typehydraulic cantilever expansion type

Scope of expansion: φ470-520mm, add pads to φ610mm

Main material: welded steel plate part of frame, main axis with heat treatment

Expansion Oil cylinder: φ160×1000mm Rotating cylinder 

Expansion of rose oil cylinder: φ160mm x 95mm 2pcs

Suitable wide: 800-1800mm    

Specifications: Weight capacity 15000Kg

O.D. of the suitable coil: ≤ φ1600mm

4.  Hydraulic press-guide, shovel-head mechanism:

    Hydraulic press-guide mechanism: It consists of hydraulic press-guide arm, press-guide rubber wheel, bearing base, chain & sprocket wheel transmission mechanism, equipped with 2.2kw cycloidal speed motor etc.

  Type: hydraulic Cantilever styled, hydraulic motor press-guide

  Main material: Steel structure pieces of press-guide arm, press-guide roller with polyurethane

  Oil cylinder: φ8400mm

  Press-guide roll: φ310×400mm

  Press-guide motor: 2.2kw cycloidal speed motor

     Hydraulic shovel-head mechanism: It consists of shovel-head shell, hydraulic flexible shovel-head plate, shovel-head hydraulic lifting & balance mechanism etc.

Type: Hydraulic lifting & flexible style

  Main material: Steel structures pieces bracket,45# shovel plate

Oil cylinder spefication: Liftingφ50×400mm  flexibleφ63×500mm

5.  Hydraulic pinching

hydraulic pinching machine:

It consists of base, bracket, beam, pinching sliding block axle seat, 2 pinching rolls, upper pinching roll hydrauilc press-down & lifting mechanism, etc.

     Type: 2 pinching rolls

     Main material: steel structure pieces base, bracket

     Pinching rollers: 42CrMo, Mid frequency hardening hardness HRC54-58 The surface is plated by hard chrome HRC 56-60

Pinching oil cylinder: φ100×180mm  2pcs

     Type of lift: press down & pinch by oil cylinder

     Oil cylinder spefication:φ63×120mm  

 Pinching power mechanism:

It consists of base, reducer, 22kw AC motor, coupling, clutch, universal drive shaft, clutch, etc.

       Type: pinching distributor box transmission

       Main material: steel structure pieces base, welded steel plate gear box

       Gear: 40Cr forging, surface with high-frequency quenching

       Universal joint: SWC1180

       Power:  22kw AC motor (frequency converting control)

6.  Hydraulic head-shearer: .3×1800 mm ( Hydraulic head & tail shearing)

7.  looping & transition:

It consists of bracket, Arc transition rollaway nest, bearing base, moving lift platform, veer roller, hydraulic lifting up & down mechanism, etc.

         Looping pit: 2.5m×1.0m×2.5m (L×W×D) cement watering

8. Guide & centralization mechanism:

It consists of guide-track base, guide pillar, screw mandrel adjustable & centralizing mechanism, active guide base, multi-rolled backup wheel,  etc.

Type: Vertical roller guiding,  screw rod centralizing

     Main material: square pipe of  bracket,   45# guide pillar grinded

     Vertical rod specifications: φ90×100mm 2 pcs high-frequency quenching

         Carrier Roller specification: φ62×1800mm hard chrome surface.

Rectifying form: double lead screw with one side manual

         Adjustable range: 800-1800mm

9. Slitter:

It consists of 2sets of main-unit part & power part..

   Power part:

    It consists of power base, reducer, 55 kw DC speed-regulation motor, counter-tooth distribution gear box, coupling, clutch, universal cross gimbal shaft etc.

Type: Reducer equiped with gear counter-tooth distribution box

   Main material: Steel structure pieces base, distribution box

   Gear: 40Cr heat-treatment, High-frequency quenching

   Power: 55Kw DC speed-regulation motor equipped with SSD 590 Controller

   Main-unit part:

     It consists of base, fixed-styled bracket, sliding block of tool shaft, tool shaft two pieces, active bracket, moveable bracket hydraulic entry-exit & knife changing and adjusting mechanism, upper tool shaft simultaneous lifting & press-down adjustable mechanism, etc. ( blades, spacers, rubber ring prepared by user)

Type: disc type slitting 

 Main material: Welded pieces base, forged bearing sliding block

   Tool shaft:  42CrMo

          Moveable oil cylinder: φ80×600mm

          Material of blade: 70Sicrv.   Hardness: HRC 56-60

      Specification of blade: φ220×φ340×15mm

10. Rollerway worktable:

It consists of bracket, bearing base, rollerway, supporting plate, etc.

Type: rollerway style, with swing table

          Main material: steel pipe of frame, rollerway by seamless pipe

         Spefication:2500mm×180mm x 1000mm

11. Scrap-rewinder mechanism:

It consists of bracket, rewinding shaft,  double rewinding disc, guide wheel, rows  agency, 3kw cycloid pin wheel motor, etc.

Type:  friction tension control roll up type  automatic wiring

       Main material: Welded pieces base, frame,

         Power : 3kw cycloid pin wheel motor

12. Looping & hydraulic material-storage bridge:

It consists of bracket, bearing, active lifting platform, steering roll, hydraulic lifting up & down mechanism etc.

       Main material: structure steel platform

       Specification of looping pit: Length3.0m×Width2.2m×Depth4.5m

irrigated by cement

13. Pre-seperation, hydraulic damping & tension mechanism, hydraulic press-seperation

Mechanism, hydraulic support plate mechanism:

 It consists of base, bearing base, pre-seperation shaft, material-pressing roller mechanism, hydraulic damping bracket, damping plate, damping plate hydraulic lifting & press-down mechanism, tension frame, press-seperation bracket, press-seperation shaft, press-seperation hydraulic lifting up & press-down mechanism, equipped with material-seperation sheet, spacer etc.

Type: Hydraulic clamping-board damping style,

Main material: wool felt damping plate, polyurethane tension steering

Preassigned sheets: φ220 xφ80 x4mm  material: 65Mn

Tension roller: φ350 x 1900mm

           Damping cylinder: φ80×120mm  

 Press-seperation cylinder: φ80×300mm  2pcs

 Hyraulic pressure plate: suitable wide: 1800mm

 The pallet balances the oil cylinder: φ50 x 300mm

14. Recoiling Line: Weight capacity:

   It consists of base, speed-reduction gear transmission box, recoiling shaft,

arc-shaped plate, hydraulic recoiling expand mechanism, swallowtail slot slant slider harmomegathus mechanism, hydraulic mouth of tongs clamping mechanism, arrester mechanism, coupling, hydraulic active supporting arm, supporting base, equipped with 132Kw DC speed-regulation motor etc.

Type: hydraulic oblique T expansion, hydraulic jaw clamping

Main material: steel welded structural parts stand, distribution box

      Specification of recoiling drum: φ508 x1900 mm 

      Maximum expansion distance: 50mm

      Collapsible cylinder; φ160mm x 96mm

      Recoiling shaft material: 42CrMoV,  Heat treatment

Support cylinder: φ125 x 580mm

     Winding entrainment: hydraulic linkage inclined clamp type

Recoiling power: 132Kw DC speed-regulation motor. equipped with SSD 590 Controll er

15. Hydraulic discharging car:

It consists of frame, V-shaped supporting base, hydraulic lifting up & down mechanism, car shaft & wheel, guiding pillar, guiding sleeve, running motor,etc.This car carry seperated strips, hydraulic lifting, it is driven by four-wheeled guide rail.

Type: Guide-rail walking wheel car, hydraulic lifting, driven by motor

       Main material: steel-plate welded structure of body

       Walking wheel:42CrMo surface hardening

       Guiding pillar: 45# steel heat treatment

       Specification of oil cylinder: Liftingφ16700mm

       Running motor: 3kw cycloidal motor

   Applicable to steel coil: O.D. ≤φ1600mm

Specification: 15000kg

16. Electric control system:                                             

It consisits of main operation cabinet, vice operation table, DC electric cabinet, etc, slitting & recoiline DC motocr equiped with digital DC speed-adjusting divice( SSD 590C) , Janpanese MITSUBISHI  PLC, which carrying out whole line linkage, touched screen with Man-machine conversation, etc.

 The equipment set safty protection, emergency-stop and machine-stop lamp, etc.

Using power: 380V,  50Hz

Control voltage: 220V,  50Hz

17. Hydraulic pneumatic system: (Users prepare air)                           

Hydraulic station consists of hydraulic pump, valve plate, hydraulic inverting valve, spillover valve, defending pressure valve and adjusting valve,high pressure soft and hard pipes, joints, etc.

Transmission power: 7.5kw-4

Rated pressure: 16Mpa, and the actual press 10-12 Mpa

Flow rate:40L/min

Air force 0.5-0.9Mpa 0.9 cube (without water)

: Acquired factory Requirements

1Electrical pressure: 380V±10%,  frequency: 50Hz±10%

2Using environment: be suitable for -5-50℃,humidity20%-80% (without dew)

3. Equipment foundation: Protection guardrail, hydraulic oil

4. Air force 0.5-0.9Mpa 0.9 cube (without water)

 

Related products

Product Consulting

Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:+86-13855367553